Ball Valve – 2pc flange (soft seat)
Ball Valve – KHD-2E, KHD-2F, KHD-2D
Two-piece ball valves are among the most commonly used ball valves.
As the name implies, a two-piece ball valve consists of two pieces, one with an end connection and the body.
The second piece fits into the first, holds the trim in place, and houses the second end connection.
Flanged ball valves provide effective control of oil and gas operations.
Their characteristic feature is the flanged ends that are bolted to the oil and gas piping.
In general, soft seats are made of thermoplastic materials such as PTFE.
They are ideal for applications where chemical compatibility is important and where the tightest possible seal is essential.
However, soft seats are not recommended for dirty or abrasive process fluids.
Soft seats can break under these conditions, causing leaks in the valve.
Products on this page
Download Data Sheets
- KHD-2E product data sheet (pdf) (0.1 MB)
- KHD-2F product data sheet (pdf) (0.5 MB)
- KHD-2D product data sheet (pdf) (0.3 MB)
- KHD-2D 3D Models
KLINGER Die Erste
Phone: +886 4 22328819
KHD-2E ball valve
No mounting pad
These valves are without an ISO mounting interface.
This means that you need a bracket and drive dog to mount the actuator to the valve.
KHD-2F ball valve
The ISO regular-mounting pad accepts direct mounting of pneumatic and electric actuators.
ISO 5211 is a European standard that specifies requirements for the attachment of part-turn actuators, with or without gearboxes, to industrial valves.
KHD-2D ball valve
A direct mounting flange according to ISO 5211 is standard for these ball valves.
This feature allows an actuator to be mounted without the need for a mounting bracket and drive adapter.
This results in a significant cost reduction, a compact automated unit, and a higher level of safety for operators.